Saturday, 10 March 2018

Cabinet fettling.

Need to make holes for all the cable entries, switch / display / air inlet etc. Not the most enjoyable part, as it's a steel box. The big holes will be challenging....

 These are the holes required:

 Top:

  • VFD conduit
  • Mains inlet
  • Probe connection
  • 4th axis connection
  • PC / Ethernet connections
Bottom:

  • X, Y & Z axis motors
  • X & Y limit switches
  • Coolant and lube pump
at

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

Setting up Home Assistant on the RPi5

Home Assitant installation: Here's the RPi5 with the Compact M.2 hat alongside it. This "hat" is designed to fit inside that o...